Auto Load/unload Equipment

  • Gen 1

    2sets of 2-up fixtures @ Single PnP Head
  • Gen 2

    2 sets of 2-up fixtures @ Dual PnP Head, additional calibration mode, efficiency increased 10%
  • Gen 3

    4 sets of 1-up fixtures @ Dual PnP Head, upgraded motion mechanism and equipment appearance and also with more expansibility.

>> Features:

This is a integrated test system and equipped with CCD camera and Robots which can support high precision alignment products, increased productivity and cost effitive especially for flex functional test. The picth of the connector is 0.35mm, the scara will transfer the DUT from input tray to DUT holder with alignment tolerance of 0.015mm. The system will determine the DUT either PASS or FAIL after test. The scara will pick up the DUT and transfer to designated tray.

>> Know how:

1. Auto Load and Unload DUTs, CCD alignment,Auto sorting, Load/Unload at anytime as desired without affect machine running.

2. SCARA ROBOT Load/Unload without waiting time.

3. Can support different MSA mode.

4. Fixture was fixed on a slider base which can easily pull out and rotate 180° for maintenance or repair.

5. Can link-up with MES system (TCP/IP).

>> Application:

1. Micro-electronics products, FPC or PCBA functional test.

2. Precision assembly products.

Photo album

Photo album